IBM eserver xSeries 440, Руководство пользователя

Страница: 40 / 84

28
xSeries 440:User’s Guide
Using the documentation
The documentation for the Remote Supervisor Adapter includes the following
publications on the IBM Documentation CD.
• IBM
E
server xSeries 440 User’s Guide (this document, specifically the topics in
this section, which assist you with the cabling and configuring).
• Remote Supervisor Adapter User’s Guide for the IBM
E
server xSeries 440
This document explains how to configure and use an ASM network to manage the
server remotely through either the Web-based interface or the text-based user
interface.
Cabling and configuring the Remote Supervisor Adapter
Complete the following tasks to cable and configure the Remote Supervisor Adapter.
Note: After you initially configure the adapter, use the Web-based interface to create
a backup copy of the configuration. If you need to replace the adapter in the
future, this enables you to restore the configuration and resume normal
operation more quickly. See the Remote Supervisor Adapter User’s Guide for
the
E
server xSeries 440, on the IBM Documentation CD for details.
Task 1.
Connect the Ethernet and serial port cables. See “Cabling the Ethernet LAN
port and serial port:”.
Task 2.
Perform the initial configuration to enable remote access to the Remote
Supervisor Adapter. See “Enabling remote access to the adapter:” on page
30. This enables you to:
1. Configure the Ethernet port
2. Configure the serial (COM) port
3. Set up the point-to-point protocol
Task 3.
Configure the remote control password to enable the ASM Web interface
remote control features. See “Configuring the remote control password:” on
page 37.
Task 4.
Install the ASM device drivers. See “Installing Advanced System
Management device drivers:” on page 35.
For service, assistance, or additional information on the World Wide Web, see
Chapter 3, “Getting help and technical assistance” on page 47.
Cabling the Ethernet LAN port and serial port:
This section describes
how to cable the Remote Supervisor Adapter. You can manage the server remotely
through the Remote Supervisor Adapter using one of the user interfaces and one of
the connection methods that are described in Table 1 on page 29. Choose the
interface method you want to use to perform remote management; then, perform the
indicated cabling procedure.
If you plan to set up an ASM interconnect network, before you begin cabling the
server, see “Using the ASM interconnect network” on page 38 for instructions about
cabling the ASM interconnect port and setting up the network. You might want to
review the information in “ASM interconnect network configuration examples:” on page
42 before you connect the cables. Then, return here to start the cabling procedures.