IBM eServer xSeries 382 8834, Руководство пользователя

Страница: 25 / 56

5. From the Shell prompt, type
drvcfg
; then, press Enter.
A list of configurable components is displayed, as in the following example:
Configurable Components
Drv[67] Ctrl[3E] Lang[eng]
Drv[67] Ctrl[3F] Lang[eng]
6. Note the DRV number associated with the CTRL numbers that were noted in
step 4 on page 12. From the example, the DRV number is 67.
7. To start the LSI Configuration Utility At the Shell Prompt type:
drvcfg x y -s
Where x is the DRV number from step 6 and y is the CTRL number from step 4
on page 12. From the example,
drvcfg 67 3F -s.
8. Use the arrow keys to select a controller (channel) from the list of adapters;
then, press Enter.
9. Follow the instructions on the screen to change the settings of the selected
items; then, press Enter. The Device Properties and Mirroring Properties ,
additional screens are displayed.
When you have finished changing settings, press Esc to exit from the program;
select
Save to save the settings that you have changed.
Formatting a SCSI hard disk drive
Low-level formatting removes all data from the hard disk. If there is data you want
to save, back up the hard disk before performing this procedure.
Note: Before you format a SCSI hard disk, make sure that it is not part of a
mirrored pair. From the list of adapters, select the controller (channel) for the
drive to format. Select
Mirroring Properties and make sure the mirroring
value for the drive is set to None .
Complete the following steps to format a drive:
1. From the list of adapters, select the controller (channel) for the drive to format.
2. Select Device Properties .
3. Use the arrow keys ( ↑ or ↓ ) to highlight the drive to format.
4. Use the arrow keys (
←
or
→
) or the End key to scroll to the right.
5. Select Format ; then, press Enter to begin the low-level formatting operation.
Using ServeRAID Manager
You can use the ServeRAID
™
Manager program, which are on the IBM ServeRAID
Support CD and available for download from http://www.ibm.com/pc/support/, to:
v
Configure a redundant array of independent disks (RAID)
v Restore a SCSI hard disk drive to factory-default settings, erasing all data from
the disk
v
View your RAID configuration and associated devices
v Monitor operation of your RAID controllers
You can run ServeRAID Manager in startable-CD mode from the IBM ServeRAID
Support CD or as an installed program. For information about installing ServeRAID
Manager, see the documentation on the CD.
Chapter 2. Configuring your server
13