IBM eserver iSeries 270 страница 31 Скачать руководство пользователя

Страница: 31 / 40

__ b.

Press the Increment/Decrement push button until

appears

in the Function/Data display.

__ c.

Press the Enter push button on the control panel.

__ d.

Press the Increment/Decrement push button until

appears in

the Function/Data display.

__ e.

Press the Enter push button on the control panel.

__ f.

Press the Increment/Decrement push button until

appears in

the Function/Data display.

__ g.

Press the Enter push button on the control panel.

__ h.

Press the Mode Select button until the Normal indicator (

)

lights up.

__ i.

Press the Increment/Decrement push button until

appears

in the Function/Data display.

__ j.

Press the Enter push button on the control panel.

01 B S

should appear in the Function/Display panel. If it does

not appear, repeat steps 5a on page 26 through 5i.

__ k.

Go to step 6.

__ 6.

Power on the workstation or PC that is your console.

__ 7.

Press the system unit power-on button. The power-on light will appear.

Note:

There will be an approximately 10-second delay before power on.
The system takes approximately 5 to 20 minutes to power on and
complete an IPL.

__ 8.

Sign on the system unit. Ensure that you have service tools authority.

__ 9.

To verify your memory (main storage) card configuration, do the following:

__ a.

Type

strsst

on the command line and press Enter.

__ b.

Type

your service tools user ID and service tools password

the

System Service Tools (SST) Sign On

display and press Enter.

__ c.

Select

Start a service tool

on the

System Service Tools (SST)

display

and press Enter.

__ d.

Select

Hardware service manager

on the

Start a Service Tool

display

and press Enter.

__ e.

Select

Logical hardware resources (Buses, IOPs, Controllers...)

from

the

Hardware Service Manager

display and press Enter.

__ f.

Select

Main Storage Resources

on the

Logical Hardware Resources

display and press Enter.
Verify that the status is

Operational

for all locations.

Note:

If the status is not Operational, check the memory cards.

__ g.

If you have a printer, print the configuration list.

Note:

To print the hardware resources list, press

F12

one time. When

the

Logical Hardware Resources

menu appears, press

__ h.

To return to the Main Menu, press

three times and then press

Enter.

__ 10.

If you changed the value of the

System performance adjustment

option in step

1 on page 2, do the following to return to what you had prior to your
upgrade:

__ a.

On an iSeries command line, type

WRKSYSVAL (QPFRADJ)

Install memory

Содержание eserver iSeries 270









































Результаты поиска

Содержание eserver iSeries 270

Отзывы:

Похожие инструкции для eserver iSeries 270

Бренды по названию

Популярные бренды

IBM eserver iSeries 270, Руководство по установке

Результаты поиска

Содержание eserver iSeries 270

Отзывы:

Похожие инструкции для eserver iSeries 270

Бренды по названию

Популярные бренды