IBM eserver iSeries 270, Руководство по установке

Страница: 11 / 40

__ 13.
Remove and install the remaining memory cards.
__ 14. When you finish installing all the memory cards, turn the card assembly
over, and slide it into the system unit (
B
in Figure 2 on page 4). Push on
both card latches at the same time. Close the latches when you cannot
push the card assembly any further into the system unit.
__ 15. Reinstall the processor card assembly (
A
in Figure 2 on page 4).
__ 16. Reinstall the access cover.
__ 17. You have completed the installation of the memory cards in your system.
Go to “Install system unit covers” on page 24.
__ 18.
Do you already have a 2884 card assembly installed in postition
B
of
Figure 6 on page 8 in your model 820?
Figure 5. Install Memory Cards
Install memory
7