IBM eserver 630 6C4, Руководство по обслуживанию

Страница: 32 / 573

5. Double-click the serviceable event, or select it and click Event Details from the
menu.
6. Click FRU Information... . A window similar to the following opens:
In this example, three parts are involved in this serviceable event. The system
recommended that the part in
Slot-1
be changed (
Original=Yes
), but the
representative decided not to change the part. The HMC also recommended that
the part in
Slot-2
be changed, and the part has been replaced by a part with a
different part number. The part in
PowerSupply
was not in the initial recommendation
for replacement but was replaced with a part with the same part number.
The lower table shows any parts which you have replaced or added during your
current update session but which have not been committed to the serviceable event.
The changes from the lower table are committed by clicking the OK or Apply
button.
Replacing an Existing FRU
To replace a part already listed for this serviceable event, do the following:
1. Perform the steps in “Viewing Field Replaceable Unit (FRU) Information” on
page 11.
2. In the upper table, double-click the part you want to replace.
3. If the FRU has a new part number, type it in the New FRU Part Number field.
4. Click Replace FRU. The Update FRU Information window displays the FRU
replacement information in the lower table. Click OK or Apply to commit the
changes in the lower table to the serviceable event.
12 Eserver
pSeries 630 Models 6C4 and 6E4 Service Guide