IBM eServer 342 xSeries, Руководство по установке, Страница: 46 / 70

34
IBM xSeries 342: Installation Guide
ServerGuide startup problems
Look for the symptom in the left column of the chart. Probable solutions to the
problem are in the right column.
Setup Suggested action
Setup and Installation CD will not
start. • Ensure that the system is a supported server with a startable (bootable) CD-
ROM drive.
• If the startup (boot) sequence settings have been altered, be sure the CD-
ROM is first in the boot sequence.
• If more than one CD-ROM drive is installed, be sure that only one drive is set
as the primary drive. Start the CD from the primary drive.
ServeRAID program cannot view all
installed drives - or - cannot install
NOS. • Ensure that there are no duplicate SCSI IDs or IRQ assignments.
• Ensure that the hard disk drive is connected properly.
The Operating System Installation
program continuously loops. Free up more space on the hard disk drive.
ServerGuide will not start your NOS
CD. Ensure that the NOS CD you have is supported by ServerGuide. See the Setup
and Installation CD label for a list of NOS versions supported.
Cannot install NOS - option is
grayed out. Ensure that the NOS is supported on your server. If the NOS is supported, either
there is no logical drive defined (ServeRAID systems) or the ServerGuide System
Partition is not present. Run the ServerGuide setup and configuration program,
and ensure that setup is complete.
System Updates and Applications
CD
Suggested action
Get "time out" or "Unknown host"
errors Ensure that you have access to the Internet through FTP directly.