IBM Enterprise Server H80 Series, Руководство пользователя

Страница: 149 / 190

Appendix C. Service Processor Setup and Test
For your convenience, an example of a basic service processor setup checklist is
included here. Your setup may include more or fewer of the available features, so you
can adjust this checklist for your own application so that it is helpful to you.
Service Processor Setup Checklist
1. Unplug the power cord from the server.
2. Attach a local terminal for this setup procedure.
3. Plug in the server and power on the local terminal.
Attention: Make sure that server power remains off.
4. Bring up the service processor menus. See “Chapter 3. Using the Service
Processor” on page 17.
5. Set the system name. See “Privileged User Menus” on page 20.
6. Enable Surveillance. See “Service Processor Functions” on page 44.
7. Configure Call-In/Call-Out. See “Call-In/Call-Out Setup Menu” on page 38.
8. Exit the service processor menus.
9. Unplug the power cord from the server.
10. Attach modems (if needed). See “Accessing the Service Processor Menus
Remotely” on page 18.
11. Plug in the server.
Attention: Make sure that server power remains off.
12. Test both of the following:
v
Call-In, see “Testing Call-In” on page 134
v
Call-Out, see “Testing Call-Out” on page 134
Your service processor is now ready for use.
133