manualshive.com logo in svg

IBM Elastic Storage System 5000 Series, Руководство по оборудованию

Поделиться
Скачать
IBM Elastic Storage System 5000 Series Скачать руководство пользователя страница 43

greater than or equal to 3 meter in length. The maximum ambient operating temperature when using

only copper cable is 35C, which includes all Ethernet and InfiniBand cables less than 3 meter in length.

Dimensions and weight requirements for rack installation

Ensure that space is available in a standard 19-in. rack that is capable of supporting the enclosure. The

rack rail kit supports racks with threaded round and square rail mounting holes. The following table lists

the dimensions and weights of the enclosures:

Table 9. Physical characteristics of the enclosures

Enclosure

Height

Width

Depth

Maximum weight

Drive ready

(without

drive

modules)

Fully

configured

(with drive

modules)

IBM Elastic Storage System

5000 Expansion – Model 092

with 92 drive slots

87 mm

(3.46 in.)

483 mm

(19.0 in.)

850 mm

(33.5 in.)

44.85 kg

(98.87 lb)

49.65 kg

(109.46 lb)

Important: To avoid potential equipment damage during transport and subsequent loss of data, see

Procedure: Transporting a 5U 92-drive expansion enclosure. The procedure describes what to do for the

following situations:
• When you are powering off an 5U expansion enclosure because you intend to transport it to another

location.

• When you intend to move a rack that contains an 5U expansion enclosure.
The procedure describes how to remove each drive from the 5U enclosure and transport the enclosure.

Removing the drives prevents damage to the drives and makes the lighter enclosure easier to move.

The following table shows the rack space requirements for a Model 092 expansion enclosure:

Table 10. Rack space requirements for the Model 092 expansion enclosure
Minimum rail length

Maximum rail depth

670 mm (26.38 in.)

870 mm (34.25 in.)

Service clearance for Model 092 expansion enclosure
The service clearance area is the area around the rack which is needed for the authorized service

representatives to service the enclosure as shown in the sample illustration in Figure 6 on page 30.

Chapter 4. Planning for hardware  29

Содержание Elastic Storage System 5000 Series







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды