manualshive.com logo in svg

IBM DTCA-23240 - Travelstar 3.2 GB Hard Drive, Технические характеристики

Поделиться
Скачать
IBM DTCA-23240 - Travelstar 3.2 GB Hard Drive Скачать руководство пользователя страница 4

1st Edition (0.1) S83H-5548-00 (May 08, 1997) Preliminary
2nd Edition (0.2) S83H-5548-01 (May 15, 1997) Preliminary
3rd Edition (1.0) S83H-5548-02 (June 27, 1997)
4th Edition (1.1) S83H-5548-03 (July 16, 1997)
5th Edition (2.0) S83H-5548-04 (September 5, 1997)
6th Edition (3.0) S83H-5548-05 (October 01, 1997)

The following paragraph does not apply to the United Kingdom or any country where such provisions are
inconsistent with local law: 

INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS

PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer or express or implied warranties
in certain transactions, therefore, this statement may not apply to You.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the
information herein; these changes will be incorporated in new editions of the publication. IBM may make improve-
ments and/or changes in the product(s) and/or the program(s) described in this publication at any time.

It is possible that this publication may contain reference to, or information about, IBM products (machines and
programs), programming, or services that are not announced in your country. Such references or information
must not be construed to mean that IBM intends to announce such IBM products, programming, or services in your
country.

Technical information about this product is available from your local IBM representative or at 

http://www.ibm.com/harddrive

IBM may have patents or pending patent applications covering subject matter in this document. The furnishing
of this document does not give you any license to these patents. You can send license inquiries, in writing, to the
IBM Director of Commercial Relations, IBM Corporation, Armonk, NY 10577.

 

Copyright International Business Machines Corporation 1997. All rights reserved.

Note to U.S. Government Users —Documentation related to restricted rights —Use, duplication or disclosure is
subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp.

Содержание DTCA-23240 - Travelstar 3.2 GB Hard Drive































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды