IBM DS3500, Инструкция по установке, эксплуатации и обслуживанию

Страница: 38 / 180

- IBM Systems Safety Notices
– IBM System Storage DS3500 and EXP3500 Rack Installation and Quick Start
Guide
Premium features activation or entitlement kits might also come inside the box, if
you ordered them.
If an item is missing or damaged, contact your IBM marketing representative or
authorized reseller.
DS3500 installation overview
CAUTION:
or
>18 kg (39.7 lb)
or
18-32 kg (39.7-70.5 lb)
The weight of this part or unit is between 18 and 32 kg (39.7 and 70.5 lb). It
takes two persons to safely lift this part or unit. (C009)
Attention: A fully configured DS3500 storage subsystem weighs up to 27 kg (60
lb). At least two people should lift the DS3500 storage subsystem from the shipping
box. You might want to open the sides of the shipping box and remove the
components from the DS3500 storage subsystem before you lift it from the shipping
box, to lighten the storage subsystem.
The following steps summarize the installation process:
1. Review the preparation recommendations. See “Preparing for installation” on
page 19.
2. Prepare the installation site. See “Preparing the site” on page 20.
3. Prepare the rack. See the DS3500 and EXP3500 Rack Installation and Quick
Start Guide .
4. Record the serial number, machine type and model number, and RAID
controller MAC addresses for your DS3500 storage subsystem in Appendix A,
“Records,” on page 141. See Figure 1 on page 2 for the location of the serial
number.
The MAC addresses are labeled near the Ethernet port on each RAID
controller.
5. Install and secure the DS3500 chassis and components in the rack. See the
DS3500 and EXP3500 Rack Installation and Quick Start Guide .
6. Install the expansion enclosure in the rack, if you are installing one or more
expansion enclosures. Follow the instructions in the DS3500 and EXP3500
Rack Installation and Quick Start Guide .
7. Cable the DS3500 storage subsystem to the expansion enclosures. See
“Connecting expansion enclosures to the DS3500” on page 40.
8. Complete one of the following cabling tasks to enable management of the
DS3500 configuration:
v
If you are using out-of-band management, cable the DS3500 Ethernet ports
to either the management workstation or the host.
18
System Storage DS3500 and EXP3500: Installation, User’s, and Maintenance Guide