IBM DS3500, Быстрый старт

Страница: 10 / 18

3. Align the front mounting holes on each side of the storage subsystem or expansion enclosure with the
mounting holes on the front of the support rails.
4.
Install and tighten one M5 screw in the support hole on each side of the front of the storage
subsystem or expansion enclosure (no washer is required), as shown for the DS3512 or EXP3512 in
Figure 11, and for the DS3524 or EXP3524 in Figure 12.
5. Install and tighten the two M4 screws through rear of the support rails into the slotted holes on the
outside of the storage subsystem or expansion enclosure.
M5 screws
Figure 11. Securing a DS3512 or EXP3512 to a rack