IBM DR550, Руководство по диагностике и обслуживанию

Страница: 51 / 258

v
Information LED: When this LED is lit, it indicates that a noncritical event has
occurred. An LED on the light path diagnostics panel is also lit to help isolate
the error.
v
System-error LED: When this LED is lit, it indicates that a system error has
occurred. An LED on the light path diagnostics panel is also lit to help isolate
the error.
v Release latch: Slide this latch to the left to access the light path diagnostics
panel.
USB connectors: Connect a USB device, such as USB mouse, keyboard, or other
USB device, to either of these connectors.
Video connector:
Connect a monitor to this connector.
Hard disk drive activity LED: On some server models, each hot-swap hard disk
drive has an activity LED. When this LED is flashing, it indicates that the drive is
in use.
Hard disk drive status LED: On some server models, each hot-swap hard disk
drive has a status LED. When this LED is lit, it indicates that the drive has failed.
When this LED is flashing slowly (one flash per second), it indicates that the drive
is being rebuilt as part of a RAID configuration. When the LED is flashing rapidly
(three flashes per second), it indicates that the controller is identifying the drive.
CD/DVD-eject button: Press this button to release a CD or DVD from the
CD-RW/DVD drive.
CD/DVD drive activity LED: When this LED is lit, it indicates that the
CD-RW/DVD drive is in use.
Rack release latches: Press these latches to release the server from the rack.
Rear view
Figure 6 shows the connectors and LEDs on the rear of the server.
Power-cord connector:
Connect the power cord to this connector.
Figure 6. File System Gateway rear view
Chapter 5. DR550 File System Gateway (FSG)
23