IBM DR550, Руководство по диагностике и обслуживанию, Страница: 35 / 258

Chapter 2. Using the monitor
Note: The complete monitor manual is available at http://www.osdmanual.com.
Match the OSD displayed when the Menu button is pushed with one of the
OSD choices on the Web site.
When using the monitor, observe the following basic guidelines:
v
Never insert anything metallic into the openings in the cabinet of the LCD
monitor; doing so can create the danger of electric shock.
v
To avoid electric shock, never open the LCD monitor case. The case should only
be opened by trained service personnel.
v
Never use your LCD monitor if the power cord has been damaged. Do not
allow anything to rest on the power cord or pinch the power cord.
v
Be sure to hold the plug, not the cord, when disconnecting the LCD monitor
from an electric socket.
v Openings in the LCD monitor case are provided for ventilation. To prevent
overheating, these openings should not be blocked or covered. Install the unit in
a well-ventilated area.
v
Place your LCD monitor in a location with low humidity and a minimum
amount of dust.
v
If the LCD monitor accidentally gets wet, unplug it and contact your IBM
representative or reseller immediately. You can clean the LCD monitor with a
damp cloth when necessary, but be sure to unplug the LCD monitor first.
v
Place the LCD monitor on a solid surface and treat it carefully. The screen is
made of thin glass with a plastic front surface and can be damaged if dropped,
hit, or scratched. Do not clean the front panel with ketone-type materials (for
example, acetone), ethyl alcohol, toluene, ethyl acid, methyl, or chloride. These
materials might damage the monitor.
v
Locate your LCD monitor near an easily accessible AC outlet.
v If there are any unusual sounds or smells coming from your LCD monitor,
unplug it immediately and contact your IBM representative or reseller.
v
High temperature can cause problems. Keep your LCD monitor away from
direct sunlight, heaters, and other sources of heat.
v
Unplug your LCD monitor when it is going to be left unused for an extended
period of time.
v
Unplug your LCD monitor from the AC outlet before any service.
v
The maximum operating ambient temperature is 40°C.
v
Connect the mouse (touchpad, pointer) and keyboard only to listed Information
Technology Equipment (ITE) with Limited Power Source (LPS) keyboard and
mouse (touchpad, pointer) outputs.
User controls
The controls shown in Table 2 are available on the front of the monitor.
Table 2. User controls
Auto Activates the auto adjustment function. The
Auto adjustment is being
processed
message is displayed.
© Copyright IBM Corp. 2008
7