IBM Dock II, Руководство пользователя

Страница: 93 / 170

g=
xxxx
:
6
where
xxxx
are the first four digits of the host adapter BIOS
address in hex. (DC000h is the default address.)
Use the Up and Down Arrow keys (
↑
or
↓
) and Enter to make
selections. Press Esc at any time to return to the previous menu.
You can press F6 to restore the original default settings. To quit the
changes you made in the Configure/View Host Adapter Settings
menu, press Esc and select
No
when asked if you want to save the
changes.
Main Menu Options
Configure/View Host Adapter Settings
The Configuration screen displays the basic software configurable
options: IRQ, Host Adapter SCSI ID, Parity Checking, and Host
Adapter Termination. Highlight an option and press Enter to see a
list of possible values. Some options include information to help you
determine which value to select.
Note: The Configuration Manager assigns the host adapter's IRQ and
other resources at system bootup. It will override any IRQ
changes made in the SCSISelect utility.
If you select SCSI Device Configuration you can view another menu
and change these options for each device on the SCSI bus: Initiate
Synchronous Negotiation, Maximum Synchronous Transfer Rate,
Enable Disconnect, Send Start Unit Command, and Include in BIOS
Scan.
If you select Advanced Configuration Options you can view a menu
of these advanced options: Host Adapter BIOS Enable or Disable,
Extended BIOS Translation, and BIOS Support for More than 2 Drives
(DOS 5.0 and above).
SCSI Disk Utilities
When you select SCSI Disk Utilities from the Main Menu, a list of
installed SCSI devices appears. When you select a device, the
Utilities menu appears.
Chapter 5. Using the SCSI Controller
77
Title: C78JAMST CreationDate: 05/06/94 19:15:58