IBM Deskstar Deskstar 3, Руководство пользователя

Страница: 87 / 392

Chapter 7. Twinaxial Configuration
Characters Per Inch (CPI). . . . . . . . . . 77
Lines Per Inch (LPI) . . . . . . . . . . . 78
Maximum Print Position (MPP). . . . . . . . 78
Maximum Page Length (MPL) . . . . . . . . 79
Print Quality . . . . . . . . . . . . . . 80
Print Language . . . . . . . . . . . . . 81
Printer Address . . . . . . . . . . . . . 82
Data Stream . . . . . . . . . . . . . . 83
Emulation Mode. . . . . . . . . . . . . 84
Media Size Priority . . . . . . . . . . . . 85
Bar Code Mode . . . . . . . . . . . . . 85
Graphics Mode . . . . . . . . . . . . . 86
Alarm Control . . . . . . . . . . . . . 87
Override Host / Paper Source . . . . . . . . 87
This chapter describes how to check and change twinax configuration parameters
for your 4247 printer. The chapter is divided into sections according to parameter.
Refer to this partial table of contents for parameter and page listings.
Characters Per Inch (CPI)
You can set the Characters Per Inch (CPI) to any of the following values:
v
10 (Default)
v
12
v
15
v
16.7
Notes:
1. It is possible to specify a CPI value that causes the page width (maximum print
position) to exceed the maximum physical page width. If this occurs, the
printer automatically changes the maximum print position to the highest valid
value for the new CPI setting. See “Maximum Print Position (MPP)” on page 78
for more information.
2.
This parameter can be overridden by the computer.
3. Only 10 CPI is valid when either OCR-A or OCR-B is selected as a print
language.
To change or check the CPI value, follow these steps:
1. Press Menu.
2. Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Twinax Configuration
3.
Press Enter.
The printer displays
Twinax Configuration
Characters Per Inch
4. Press Enter to display the current value.
5. Press Scroll
↑
or Scroll
↓
until the desired value for CPI is displayed.
6. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
7.
Press Start or Return to exit the Menu. See “Exiting the Configuration Menu”
on page 55.
© Copyright IBM Corp. 2002
77