IBM DDS Gen 5, Руководство пользователя, Страница: 18 / 66

Tape Drive Components
The following describes the major components of the tape drives.
1
Clean LED (green)
2
Media LED (green)
3
(Drive LED (amber)
4
Eject button
For more information on LEDs, see“Front panel LEDs” on page 19.
Opening the computer
To open the computer:
1. Shut down the computer as you would normally. Then turn off the computer
and all peripherals connected to it.
2.
Remove the computer’s power cord from the computer connector.
3. Remove the computer cover. For more information, refer to the documentation
that came with your computer.
Note: If you have to disconnect cables to gain access to the mounting bay, note
which cables were removed. You can then refer to this information when you
reconnect the cables at the end of this procedure.
4. Select an available 3.5-inch or 5.25-inch mounting bay, depending the internal
tape drive you want to install.
Note: The internal tape drive can be mounted horizontally or vertically (on its
side).
5.
If the mounting bay has a “filler panel,” remove it according to the instructions
in your computer’s documentation. Place the screws aside, You will need them
to secure the drive in the bay.
6. If the computer does not have a SCSI host adapter, install one.
8
DDS Gen 5 Tape Drive: User’s Guide