IBM DCS3860, Инструкция по установке, использованию и обслуживанию

Страница: 15 / 204

About this document
This document provides instructions for installing and customizing the IBM
System Storage DCS3860 storage system and the EXP3800 expansion enclosure. It
also provides maintenance procedures and troubleshooting information.
Who should read this document
This document is intended for system operators and service technicians who have
extensive knowledge of Fibre Channel Serial Attached SCSI (SAS) and network
technology.
How this document is organized
Chapter 1, “Introduction,” on page 1 describes the IBM System Storage DCS3860
storage system and the EXP3800 expansion enclosure. This chapter includes an
inventory checklist and an overview of the storage expansion enclosure features,
operating specifications, and components.
Chapter 2, “Installing the DCS3860,” on page 25 contains information on how to
install the DCS3860.
Chapter 3, “Cabling the DCS3860 storage system,” on page 43 contains information
on how to cable the DCS3860.
Chapter 4, “Operating the DCS3860 storage system and EXP3800 expansion
enclosure,” on page 55 contains information on how to power on and off the
storage expansion enclosure, recover from an overheated power supply,
troubleshoot the storage expansion enclosure, and interpret LEDs.
Chapter 5, “Replacing components,” on page 77 contains step-by-step instructions
about how to install or remove customer replaceable units (CRUs), such as hard
disk drives, power supplies, fan assemblies, environmental service modules
(ESMs), drive drawers, and SFP modules.
Chapter 6, “Hardware maintenance,” on page 123 describes problems and
symptoms that are specific to your storage expansion enclosure. It also provides a
parts list for the DCS3860.
Chapter 7, “Records,” on page 141 provides a table that you can use to record and
update important information about your DCS3860, including serial number and
device records. Whenever you add options to your DCS3860, be sure to update the
information in this table.
Chapter 8, “Rack mounting template,” on page 145 provides the rack mounting
templates for installation of the DCS3860. If you want to tear out the templates
from the document for use during installation, use these copies of the templates.
Chapter 9, “Specifications for non-IBM rack installation,” on page 149 provides
safety requirements and rack specifications for installing DCS3860 storage systems
and DCS3860 storage expansion enclosures into non-IBM racks.
© Copyright IBM Corp. 2013
xv