IBM Broadcom 10 Gb Gen 2 2-port, Краткое руководство

Страница: 5 / 9

Broadcom 10 Gb Gen 2 2-port and 4-port Ethernet Expansion Cards (CFFh) for IBM BladeCenter 5
Figure 3. IBM BladeCenter H I/O topology showing the I/O paths from CFFh expansion cards
One I/O module must be installed in the chassis for each Ethernet port that you want to use on the
expansion card. Table 4 lists the specific I/O bays in the chassis.
For the Broadcom 10 Gb Gen 2 2-port Ethernet Expansion Card (CFFh), you must install an I/O
z
module in I/O bays 7 and 9 (that is, two I/O modules).
For the Broadcom 10 Gb Gen 2 4-port Ethernet Expansion Card (CFFh), you must install an I/O
z
module in I/O bays 7, 8, 9, and 10 (that is, four I/O modules).
Table 4. Locations of I/O modules required to connect to the expansion card
Expansion card I/O bay 7 I/O bay 8 I/O bay 9 I/O bay 10
Broadcom 10 Gb Gen 2 2-port Ethernet
Expansion Card (CFFh)
Supported I/O
module
Not used Supported I/O
module
Not used
Broadcom 10 Gb Gen 2 4-port Ethernet
Expansion Card (CFFh)
Supported I/O
module
Supported I/O
module
Supported I/O
module
Supported I/O
module