IBM BladeCenter JS12, Руководство по диагностике и обслуживанию

Страница: 39 / 318

A700yyyy Licensed internal code SRCs
An A7xx SRC is a licensed internal code SRC that is deprecated in favor of a
corresponding B7xx SRC. B7xx SRCs are described in “B700xxxx Licensed internal
code SRCs” on page 39.
Table 9. A700yyyy Licensed internal code SRCs
Attention code Description Action
A7003000 A user-initiated platform dump occurred. No service action required.
A700yyyy See the description for the B700yyyy error
code with the same
yyyy value.
Perform the action in the B700yyyy error code
with the same
yyyy value.
AA00E1A8 to AA260005 Partition firmware attention codes
AAxx attention codes provide information about the next target state for the
platform firmware. These codes might indicate that you need to perform an action.
Table 10 describes the partitioning firmware codes that may be displayed if POST
detects a problem. Each message description includes a suggested action to correct
the problem.
Table 10. AA00E1A8 to AA260005 Partition firmware attention codes
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v See Chapter 3, “Parts listing, Type 7998,” on page 235 to determine which components are CRUs and which
components are FRUs.
Attention code Description Action
AA00E1A8 The system is booting to the open
firmware prompt. At the open firmware prompt, type
dev
/packages/gui obe
and press
Enter
; then, type
1
to select SMS Menu .
AA00E1A9 The system is booting to the System
Management Services (SMS) menus.
1.
If the system or partition returns to the
SMS menus after a boot attempt failed, use
the SMS menus to check the progress
indicator history for a
BAxx xxxx error,
which may indicate why the boot attempt
failed. Follow the actions for that error code
to resolve the boot problem.
2. Use the SMS menus to establish the boot
list and restart the blade server.
AA00E1B0 Waiting for the user to select the
language and keyboard. The menu
should be visible on the console.
1. Check for server firmware updates.
2. Apply any available updates.
3. If the problem persists:
a. Go to “Checkout procedure” on page
186.
b. Replace the system-board and chassis
assembly, as described in “Replacing the
Tier 2 system-board and chassis
assembly” on page 274.
Chapter 2. Diagnostics
25