IBM BladeCenter HS20 7981, Руководство по диагностике и обслуживанию

Страница: 63 / 112

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See Chapter 3, “Parts listing, Type 7981,” on page 53 to determine which components are customer
replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error code Description Action
201-xxx-0nn Failed memory test.
Note: nn = DIMM slot number, 01 to 04
1. Reseat the DIMM in the indicated slot.
2. Replace the following components one at a time,
in the order shown, restarting the blade server
each time:
a. DIMM in indicated slot
b. (Trained service technician only) System
board assembly
201-xxx-n99 Multiple DIMM failure, see error text.
Note: n = number of failing pair; see
“Installing a memory module” on page 64.
1. See the error text for failing DIMMs.
2. (Trained service technician only) Replace the
system board assembly.
202-xxx-00n Failed system cache test.
Note: n = microprocessor 1 or
microprocessor 2.
1. Reseat microprocessor n .
2. Replace the following components one at a time,
in the order shown, restarting the blade server
each time:
a. (Trained service technician only)
Microprocessor n
b. (Trained service technician only) System
board assembly
217-198--xxx Could not establish drive parameters.
1. Reseat hard disk drive x.
2. Update the BIOS code.
3. Replace the following components one at a time,
in the order shown, restarting the blade server
each time:
a. Hard disk drive x
b. (Trained service technician only) System
board assembly
217-xxx-000 Failed hard disk drive test.
Note: If RAID is configured, the SAS
Attached Disk number refers to the RAID
logical drive.
1. Reseat hard disk drive 1.
2. Replace hard disk drive 1.
217-xxx-001 Failed hard disk drive test.
Note: If RAID is configured, the SAS
Attached Disk number refers to the RAID
logical drive.
1. Reseat hard disk drive 2.
2. Replace hard disk drive 2.
405-xxx-000 Failed Ethernet test on controller on the
system board.
1. Make sure that Ethernet is not disabled in the
Configuration/Setup Utility program.
2. (Trained service technician only) Replace the
system board assembly.
Chapter 2. Diagnostics
47