IBM B50, Руководство пользователя

Страница: 115 / 221

Installing Adapters
Before you begin:
Ÿ
Read “Safety Considerations” on page 4-2 and “Handling Static Sensitive
Devices” on page 4-3.
Ÿ
Read the instructions that came with the adapter.
Ÿ
If you are installing a graphics adapter, refer to the PCI Adapter Placement
Reference before choosing the slot for the adapter.
Ÿ
Remove the server cover (see “Removing the Cover” on page 4-4).
1. If you are also installing memory modules, go to “Installing Memory Modules” on
page 4-16, and then return here.
2. Check the instructions that came with the adapter for setting jumpers and
switches.
3. Select a slot for the adapter:
If you are installing a graphics adapter, refer to the PCI Adapter Placement
Reference to choose the appropriate slot to install your graphics adapter. Some
graphics adapters occupy two slot spaces when installed. You may have to
relocate an existing adapter. If you do, refer to “Removing Adapters” on
page 4-26.
Attention: Failure to install your graphics adapter in the correct slot may result
in your adapter, or your server, not functioning correctly.
Your server has the following slots:
Ÿ
Slot 1: 32-bit, 5-volt, PCI short card (secondary)
Ÿ
Slot 2: 32-bit, 5-volt, PCI (primary)
Chapter 4. Installing and Removing Options
4-23