manualshive.com logo in svg

IBM @server xSeries 343, Руководство по эксплуатации продукта

Поделиться
Скачать
IBM @server xSeries 343 Скачать руководство пользователя страница 135

xSeries 343 Product Guide 

 

 

123

How to Obtain Warranty Service:

 

The following is added to this section:

 

 

To obtain warranty service from IBM in EU countries, see the telephone 
listing in Part 3 - Warranty Information. 

You may contact IBM at the following address: 

IBM Warranty & Service Quality Dept. 
PO Box 30 
Spango Valley 
Greenock 
Scotland PA16 0AH 

AUSTRIA, DENMARK, FINLAND, GREECE, ITALY, NETHERLANDS, 
PORTUGAL, SPAIN, SWEDEN AND SWITZERLAND

 

Limitation of Liability:

 

The following replaces the terms of this section in its 

entirety:

 

Except as otherwise provided by mandatory law: 

1.

 

IBM's liability for any damages and losses that may arise as a 

consequence of the fulfillment of its obligations under or in connection with 
this Statement of Limited Warranty or due to any other cause related to this 
Statement of Limited Warranty is limited to the compensation of only those 
damages and losses proved and actually arising as an immediate and direct 
consequence of the non-fulfillment of such obligations (if IBM is at fault) or 
of such cause, for a maximum amount equal to the charges you paid for the 
Machine. For purposes of this item, the term “Machine” includes Machine 
Code and Licensed Internal Code (“LIC”). 
The above limitation shall not apply to damages for bodily injuries (including 
death) and damages to real property and tangible personal property for which 
IBM is legally liable. 

2.

 

UNDER NO CIRCUMSTANCES IS IBM, ITS SUPPLIERS OR RESELLERS 

LIABLE FOR ANY OF THE FOLLOWING, EVEN IF INFORMED OF THEIR 
POSSIBILITY: 1) LOSS OF, OR DAMAGE TO, DATA; 2) INCIDENTAL OR 
INDIRECT DAMAGES, OR FOR ANY ECONOMIC CONSEQUENTIAL 
DAMAGES; 3) LOST PROFITS, EVEN IF THEY ARISE AS AN IMMEDIATE 
CONSEQUENCE OF THE EVENT THAT GENERATED THE DAMAGES; OR 4) 
LOSS OF BUSINESS, REVENUE, GOODWILL, OR ANTICIPATED SAVINGS. 

 

FRANCE AND BELGIUM

 

Limitation of Liability:

 

The following replaces the terms of this section in its 

entirety:

 

Except as otherwise provided by mandatory law: 

Содержание @server xSeries 343


































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды