IBM @server pSeries Скачать руководство пользователя | Manualshive

Страница: 32 / 32

background image

pshpstuningguidewp040105.doc

Page

32

© IBM Corporation 2005

IBM Corporation
Marketing Communications
Systems Group
Route 100
Somers, New York 10589

Produced in the United States of America
April 2005
All Rights Reserved

This document was developed for products
and/or services offered in the United States.
IBM may not offer the products, features, or
services discussed in this document in other
countries.

The information may be subject to change
without notice. Consult your local IBM
business contact for information on the
products, features and services available in
your area.

All statements regarding IBM’s future
directions and intent are subject to change or
withdrawal without notice and represent goals
and objectives only.

IBM, the IBM logo,

~

, AIX 5L,

LoadLeveler, POWER4, , pSeries
and Redbooks are trademarks or registered
trademarks of International Business
Machines Corporation in the United States or
other countries or both. A full list of U.S.
trademarks owned by IBM may be found at

http://www.ibm.com/legal/copytrade.shtml

.

Other company, product, and service names
may be trademarks or service marks of others.

IBM hardware products are manufactured
from new parts, or new and used parts.
Regardless, our warranty terms apply.

Copying or downloading the images contained
in this document is expressly prohibited
without the written consent of IBM.

This equipment is subject to FCC rules. It will
comply with the appropriate FCC rules before
final delivery to the buyer.

Information concerning non-IBM products was
obtained from the suppliers of these products
or other public sources. Questions on the
capabilities of the non-IBM products should be
addressed with the suppliers.

All performance information was determined in
a controlled environment. Actual results may
vary. Performance information is provided
“AS IS” and no warranties or guarantees are
expressed or implied by IBM.

The IBM home page on the Internet can be
found at

http://www.ibm.com

.

The pSeries home page on the Internet can be
found at

http://www.ibm.com/servers/eserver/pseries

.

«
...
30
31
32

Содержание @server pSeries

































Отзывы:

Нет отзывов

Похожие инструкции для @server pSeries

xStack DGS-3420 Series

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 29

Бренд: D-Link Страницы: 454

Бренд: D-Link Страницы: 502

Бренд: D-Link Страницы: 244

Бренд: D-Link Страницы: 20

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 37

Бренд: D-Link Страницы: 28

Бренд: vantiva Страницы: 58

Бренд: P-Link Computer Страницы: 92

Бренд: Gefen Страницы: 11

Бренд: Magnum Страницы: 3

Cyber SWITCH 1000

Бренд: Cabletron Systems Страницы: 106

Бренд: Eaton Страницы: 2

Бренд: WAGO Страницы: 36

Бренд: Eaton Страницы: 5

iBootBar iBB-DC8

Бренд: Dataprobe Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды