IBM ARTIC960RxD, Инструкция по установке и эксплуатации

Страница: 14 / 56

Installing the IBM ARTIC960RxD Quad Digital Trunk PCI Adapter
The following procedure describes how to install the IBM ARTIC960RxD Quad DTA
into the system unit. The steps may vary depending on your system unit. Refer to
the documentation that came with your system unit for detailed instructions on
performing the following procedures:
Note: Insure that the jumpers are set as described in “Jumper Installation
Information” on page 1-3
Ÿ
Be sure to perform necessary shutdown procedures to protect your system and
data.
Ÿ
Shut down your system unit
Ÿ
Remove the system unit covers
Ÿ
Install the IBM ARTIC960RxD Quad DTA into your system unit
Ÿ
Install the H.100 cable if necessary
Ÿ
Replace the system unit covers
1-4
Installation and User's Guide