IBM 88861TU, Инструкция по установке и эксплуатации

Страница: 31 / 82

I/O modules
You can install up to four I/O modules in the BladeCenter S chassis, including
Ethernet switch modules, Fibre Channel switch modules, pass-thru modules
(optical and copper), SAS connectivity modules, and SAS RAID controller modules.
I/O modules
1 and 3
I/O modules
2 and 4
! !
! !
Note:
You can find the documentation for I/O modules at the IBM Systems Information
Center, which is at http://publib.boulder.ibm.com/infocenter/systems/index.jsp.
To access the I/O module documentation from this site, click
Systems hardware
→
BladeCenter information
→
I/O modules .
To determine which I/O modules are compatible with the BladeCenter S chassis,
see the IBM ServerProven Web site at http://www.ibm.com/servers/eserver/
serverproven/compat/us/eserver.html.
I/O module bay 1
I/O module bay 1 supports any standard Ethernet or pass-thru module that
connects to the two integrated Ethernet controllers in each of the blade servers.
Note: This I/O module bay is wired differently from I/O module bay 1 in a
BladeCenter E or BladeCenter H chassis.
I/O module bay 2
I/O module bay 2 supports an optional I/O module, such as an Ethernet switch or
a pass-thru module, that connects to the two integrated Ethernet controllers in each
of the blade servers.
Note: If you install an I/O module in I/O module bay 2, you will also need to
install an expansion card option, such as the 2/4 Port Ethernet Expansion Card, in
each blade server that will access the external Ethernet network through the switch
module in I/O module bay 2.
Chapter 1. Introduction
19