IBM 884872U - eServer 326 - 8848, Руководство пользователя

Страница: 19 / 54

v
Systems-management capabilities
Your server comes with features that a network administrator or file server can
use to remotely manage and control the server.
If your server is connected to an Advanced System Management (ASM)
interconnect network that is managed by a Remote Supervisor Adapter II or if an
optional Remote Supervisor Adapter II is installed in the server, you can view the
system health; turn on, turn off, and restart the server; view the error log; view
the vital product data; and send alerts over the ASM interconnect network. To
order an optional Remote Supervisor Adapter II, contact your IBM marketing
representative or authorized reseller.
Note: IBM intends to support the Remote Supervisor Adapter II on this server in
the future. To determine the availability of this feature, go to
http://www.ibm.com/pc/us/compat/.
Reliability, availability, and serviceability
Three important computer design features are reliability, availability, and
serviceability (RAS). The RAS features help to ensure the integrity of the data that
is stored in your server, the availability of the computer when you need it, and the
ease with which you can diagnose and repair problems.
Your server has the following RAS features:
v
Advanced Configuration and Power Interface (ACPI)
v Automatic restart after a power failure
v
Baseboard management controller (service processor)
v Basic input/output system (BIOS) code boot-block recovery
v
Chipkill memory protection
v
Cooling fans with speed control
v
Customer support center 24 hours per day, 7 days a week
2
v
Cyclic redundancy check (CRC) small computer system interface (SCSI) data
bus
v Diagnostic CD
v
Diagnostic LEDs on the system board
v Diagnostic support of Ethernet adapters and redundant array of independent
disks (RAID) adapters
v
Double-data-rate synchronous dynamic RAM (DDR SDRAM) with serial presence
detect (SPD)
v
Error checking and correcting (ECC) memory
v
Error codes and messages
v
Failover Ethernet support
v Hot-swap drive bays (some models)
v
Menu-driven setup, system configuration, RAID configuration, and diagnostic
programs
v Microprocessor built-in self-test (BIST)
v
Monitoring support for temperatures, voltages, and fan speed
v Peripheral component interconnect (PCI) bus parity
v
Power-on self-test (POST)
2. Service availability will vary by country. Response time will vary depending on the number and nature of incoming calls.
Chapter 1. Introducing the
Eserver
326 Type 8848 server
5