– Select
POST Error Log
to view the three most recent error codes and
messages that the system generated during POST.
Select
Clear event/error logs
from the
POST Error Log
menu to clear the
Error log.
– Select
System Event/Error Log
to view the System Event/Error log. The
System Event/Error log contains all the system error and warning messages
that the system has generated. You can use the arrow keys to move between
pages in the System Event/Error log.
Select
Clear event/error logs
from the
System Event/Error Log
menu to
clear the Error or Event log.
v
Save Settings
Select this choice to save your customized settings.
v
Restore Settings
Select this choice to delete your changes and restore the previous settings.
v
Load Default Settings
Select this choice to cancel your changes and restore the factory settings.
v
Exit Setup
If you have made any changes, the program will prompt you to save the changes
or exit without saving the changes.
Additional Configuration/Setup Utility menu choices
When you install an optional Remote Supervisor Adapter in your server, you can
view additional menu choices in the Configuration/Setup Utility program, such as:
v
System Card Data
on the
System Information
menu
Select this choice to view vital product data (VPD) for some server components.
v
PCI Slot Information
Select this choice to view the properties of adapters that are installed in PCI and
PCI-X slots.
Important:
You must use the menu selections to save custom settings for the
PCI Slot/Device Information
choice. The
Save Settings
,
Restore Settings
, and
Load Default Settings
choices on the main menu of the Configuration/Setup
Utility do not save the PCI Slot/Device Information settings.
After making changes, select:
–
Save and exit the PCI Utility
to save the changes and return to the
Advanced Setup
choice.
–
Exit the PCI Utility without saving changes
to ignore the changes, restore
the previous settings, and return to the
Advanced Setup
choice.
You can use
PCI Device Control
to enable or disable the PCI and PCI-X slots
from this menu. The default setting is
Enable
for all the PCI slots. If you select
Disable
, the system will not configure the disabled device, and the operating
system will not detect the device. (This is equivalent to unplugging the device.)
v
Administrator Password
Select this choice to set or change the administrator password.
v
Remote Control Security Settings
Select this choice to set a remote-control password. When you set a
remote-control password, you can also set the number of failed attempts to enter
the correct remote-control password, and the required duration before another
attempt can be made.
18
IBM xSeries 255 Type 8685: User’s Guide
Содержание 8685 - eServer xSeries 255
