IBM 866631Y - Netfinity 7100 - 8666, Руководство по техническому обслуживанию аппаратной части

Страница: 84 / 198

Ethernet port connector
The following table shows the pin-number assignments for the RJ-45 connector.
These assignments apply to both 10BASE-T and 100BASE-TX devices.
1 6
Table 17. Ethernet RJ-45 connector pin-number assignments.
Pin Signal Pin Signal
1 Transmit data+ 5 Not connected
2 Transmit data- 6 Receive data -
3 Receive data+ 7 Not connected
4 Not connected 8 Not connected
Advanced System Management ports
The server has three communication ports dedicated to the Netfinity Advanced
System Management Processor. One port uses a standard D-shell serial-port
connector, connector C. The other two ports, which are used for the Advanced
System Management Interconnect function, use a dual RJ-45 connector.
You can attach a dedicated modem to the D-shell system-management connector
on the rear of the server to communicate with the integrated Netfinity Advanced
System Management Processor.
The Advanced System Management Interconnect function uses the RJ-45
system-management connectors. This function enables you to connect the
Advanced System Management Processors of several rack-mounted servers so that
they can communicate with each other in half-duplex mode.
Cabling the server
Refer to the following illustration for the location of input and output connectors
and for an example of proper cable routing.
74
Hardware Maintenance Manual: Netfinity 7100 – Type 8666