IBM 7953-94X, Установка

Страница: 20 / 62

Install the outriggers before you move the rack cabinet to another location. Use the 6 mm hex wrench
that comes in the hardware kit to install the four bolts that attach each outrigger to the rack cabinet.
Installing the front stabilizer bracket, recirculation prevention plate
(optional) and securing the rack to the floor surface
Learn about how to install the recirculation prevention plate, front stabilizer bracket, and to bolt the rack
to the floor surface.
See the unpacking instructions that come with the rack cabinet for information about how to unpack and
locate the rack.
Statement 2
:
DANGER:
v
Always lower the leveling pads on the rack cabinet.
v
Always install stabilizer brackets on the rack cabinet.
v
Always install servers and optional devices starting from the bottom of the rack cabinet.
v
Always install the heaviest devices in the bottom of the rack cabinet.
This procedure describes the following tasks:
v
Lowering the leveling pads
v Installing the recirculation prevention plate (optional)
v
Installing the front stabilizer bracket
v
Bolting the rack cabinet to the floor surface for added stability
To install the recirculation prevention plate, front stabilizer bracket, and to bolt the rack to the floor
surface, complete the following steps:
1. Use the open-end wrench that comes with the hardware kit to lower each of the four leveling pads
just enough so that they touch the floor. The rack casters support the weight of the rack cabinet. The
pads prevent the rack from rolling.
6
Installing the 7953-94X and 7965-94Y rack and features