IBM 73P4518, Руководство пользователя, Страница: 39 / 74

Backing up a CD
To copy a commercial CD you must own the copyright or obtain permission from
the copyright owner. If you do not own the copyright or do not obtain permission
from the copyright owner, you might be violating copyright law and might be
subject to payment of damages or other remedies. For more information on
copyright law, consult your legal advisor.
Problem solving
Computer problems can be caused by hardware, software, or user error. The
information in this section might be useful to help you solve problems or to gather
helpful information you can pass on to a service technician. You might also need to
refer to your computer, operating-system, or sound-adapter publications.
Review the following list for any problem descriptions that might fit your
situation.
You cannot create a multi session disc.
Be sure that there is enough space left on the disc for another session. Writing a
session requires lead-in and lead-out space (about 15 MB) in addition to the data
that is recorded.
You cannot successfully write to a CD-R or CD-RW disc.
Take the following actions:
1.
Verify that the process is not being interrupted by a screen saver, an antivirus
program, an Internet or e-mail program, or other software. Disable the
functions that might interrupt the write operation.
2. Verify that the hard disk has been defragmented.
3. Consult the hard disk drive manufacturer or vendor if an older hard disk drive
is conducting a thermal recalibration during a write operation.
4. Replace the disc if it is bad or scratched.
5. Disable the Windows Auto Insert Notify function on your CD-ROM and
CD-RW drives.
You cannot eject a disc.
Take the following actions after ensuring that the drive is not in the process of
writing to a disc:
1. Eject the disc through software.
2. Use the Eject button.
3. Turn off the computer. Wait 45 seconds; then turn on the computer and try
using the Eject button again.
4. If other methods do not work, use the emergency eject lever. For more
information, see Chapter 4, “Preparing to use the Combo Drive,” on page 4-1.
You cannot read from the CD disc after successfully writing to it.
Take the following actions:
Chapter 7. Using the Combo Drive
7-7