IBM 7208 Model 345, Руководство по обслуживанию

Страница: 37 / 68

5. Make sure that all other cables are properly connected, and that the wires are
routed away from the cooling fan.
6.
Perform the cover replacement procedure. Refer to “Removing and Replacing
the Cover” on page 26.
7. Plug the power cable into the electrical outlet.
8. Press the power switch to turn on the power.
Does the power-on light come and stay on, and is there airflow from the fan?
NO Verify that the 7208 Tape Drive was reassembled correctly. If the power-on
light still does not come on and there is no airflow from the fan, go to Step
1.
YES Go to Step 12.
Step 12
This step ensures that the external SCSI bus cable connection is proper.
Ensure that the SCSI bus cable is properly connected to both the host system and
to the 7208 Tape Drive.
Is the SCSI bus cable properly connected to the host system and to the 7208
Tape Drive?
NO Plug the SCSI bus cable into both the host system and the 7208 Tape Drive,
then go to Step 13.
YES Go to Step 13.
Step 13
This step ensures that the terminator is properly connected.
Ensure that the correct LVD terminator is used and properly connected to the last
device on the SCSI bus.
Is the correct LVD terminator properly connected to the last device on the SCSI
bus?
NO Ensure that the terminator is properly connected to the last device on the
SCSI bus, then go to Step 14.
YES Go to Step 14.
Chapter 3. Maintenance Analysis Procedures
23