IBM 6840GAU - NetVista A40 - 6840, Руководство по техническому обслуживанию аппаратной части

Страница: 8 / 148

If NO, continue to
002
.
If YES, proceed to
003
.
002
If the Power Management feature is enabled, do the following:
1. Start the Configuration/Setup Utility program (see “Setup Utility program” on
page 7)
2. Select Power Management from the Configuration/Setup Utility program
menu.
3. Select APM .
4.
Be sure
APM BIOS Mode
is set to
Disabled
. If it is not, press Left Arrow (
}
) or
Right Arrow (Æ) to change the setting.
5. Select Automatic Hardware Power Management .
6. Set Automatic Hardware Power Management to Disabled .
7. If the problem persists, continue to
003
.
003
Run diagnostics. If necessary, refer to “Diagnostics” on page 8.
v
If you receive an error, replace the part that diagnostics calls out or go to
″
Symptom-to-FRU Index
″
on page 37.
v
If the test stops and you cannot continue, replace the last device tested.
2
Hardware Maintenance Manual A40 Type 6840 A40P Type 6841 A40i Type 2271: IBM NetVista Computer