20
i
If your computer has
previously been used with
a CRT monitor and is currently
configured to a display mode
outside the range that the Flat
Panel monitor can display, you
may need to re-attach the CRT
monitor temporarily until you
have reconfigured the
computer, preferably to 1600 x
1200 at 60Hz.
The display mode the monitor uses is controlled by the computer. Therefore,
you should refer to your computer documentation for details on how to
change display modes.
The image size, position and shape may change when the display mode
changes. This is normal and the image can be readjusted using IMAGE
SETUP and the monitor controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker,
TFT technology is inherently flicker-free. If possible, configure your computer
for 1600 x 1200 addressability at 60Hz vertical refresh rate.
For the display modes listed below, the screen image has been optimized
during manufacture.
Factory Set Display Modes
Further Information
Display modes
Addressability
Refresh Rate
Horizontal Frequency
640 x 480
60 Hz
31.5 kHz
640 x 480
75 Hz
35.0 kHz
640 x 480
85 Hz
37.5 kHz
640 x 350
70 Hz
31.5 kHz
720 x 400
70 Hz
31.5 kHz
800 x 600
60 Hz
35.2 kHz
800 x 600
75 Hz
37.9 kHz
800 x 600
85 Hz
48.1 kHz
832 x 624
75 Hz
49.7 kHz
1024 x 768
60 Hz
48.4 kHz
1024 x 768
75 Hz
60.0 kHz
1024 x 768
85 Hz
68.7 kHz
1152 x 870
75 Hz
68.7 kHz
1152 x 900
66 Hz
61.8 kHz
1280 x 1024
60 Hz
64.0 kHz
1280 x 1024
75 Hz
80.0 kHz
1600 x 1200 †
60 Hz
75.0 kHz
1600 x 1200 ††
75 Hz
93.7 kHz
† Recommended
†† D-sub Analog only
Note : VESA timings are
as detailed in the VESA
“Display Monitor Timing
Specification”. Version
1.0, Revision 0.8, Dated
09/17/98.
