IBM 5U92, Руководство пользователя

Страница: 112 / 142

5. Slide the release latch forward ( 1 ), as shown in Figure 83 on page 84.
Figure 83. Remove the drive assembly
6. Lift the handle ( 2 ) to unlock the drive carrier from the partition, as shown in Figure 83 on page 84.
Ensure the toe on the bottom of the latch is fully disengaged.
7. Carefully lift the drive carrier up to remove it from the expansion enclosure.
8. Repeat step “4” on page 83 through step “7” on page 84 for each drive you need to remove.
Replace the drive
9. To reinstall a drive, or replace it with one from FRU stock, follow the procedure in “Installing or
replacing a drive” on page 25.
Removing a secondary expander module
You can remove a secondary expander module from a 5U expansion enclosure if it is faulty or to perform
other service tasks.
Before you begin
DANGER:
Hazardous voltage present. Voltages present constitute a shock hazard, which can cause severe
injury or death. (L004)
84 IBM Cloud Object Storage System
™
Version 3.15.6: J15 Appliance Manual