IBM 56K Modem, Руководство по установке

Страница: 46 / 68

56K Modem Internet Kit
6-3
•
If the computer does not detect the modem after this second
restart, contact your computer manufacturer for technical
assistance.
Problem
Software is not able to communicate with the modem after installation
in Windows95/98
Possible Solution
You may have a COM port/IRQ conflict
1. Right-click the My Computer icon on your desktop.
2. Click Properties .
3. Click the Device Manager tab.
•
If you see a yellow exclamation point over your modem, you
have a resource conflict, probably an IRQ conflict.
Continue with step 4.
•
If you did not see a yellow exclamation point, you may still
have an IRQ conflict. Continue with next “Possible
Solution” below. If these possible solutions do not solve
your problem, continue with step 4.
4. Follow the steps starting on page 3-9 to uninstall the modem drivers.
5. Unplug the computer from its electrical outlet.
6. Remove the cover of the computer, physically remove the modem
from its expansion slot, and replace the cover.
7. Plug the computer back into the electrical outlet, and turn it on.
8. When Windows restarts, once again right-click My Computer on
your desktop and click Properties . Click the Device Manager tab.
Double-click Computer . Make sure the Interrupt request (IRQ) radio
button is checked. You can determine which IRQ settings are free on
your system by looking for numbers that are not listed in the Setting
column. One of the following IRQs needs to be free: 3, 4, 5, or 7.