IBM 5100, Руководство по установке

Страница: 43 / 64

Chapter 5. Solving problems
31
Solving problems
Option problems Suggested action
An IBM option that was just
installed does not work. Verify that:
1. The option is designed for the server. Refer to the "Support for
Netfinity Servers" flowchart for information about obtaining
ServerProven™ compatibility information from the World Wide Web.
2. You followed the installation instructions that came with the option.
3. The option is installed correctly.
4. You have not loosened any other installed options or cables.
5. You updated the configuration information in the Configuration/Setup
Utility program. Whenever memory or an option is changed, you must
update the configuration.
If the problem remains, call for service.
Expansion enclosure
problems
Suggested action
The SCSI expansion
enclosure used to work, but
does not work now. Verify that:
1. The cables for all external SCSI options are connected correctly.
2. The last option in each SCSI chain, or the end of the SCSI cable, is
terminated correctly.
3. Any external SCSI option is turned on. You must turn on an external
SCSI option before turning on the server.
For more information, see your SCSI and expansion enclosure
documentation.
Service processor problems Suggested action
Netfinity Service Processor
Manager reports a general
monitor failure Disconnect the server from all electrical sources, wait for 30 seconds,
reconnect the server to the electrical sources, and restart the server.
If a problem remains, call for service.