IBM 4851 514, Планирование, установка и руководство по обслуживанию

Страница: 61 / 162

v
For the keyboard integration tray, the 4610 TF6 or TF7 is set into a plastic printer
base and then set on the keyboard integration tray.
Figure 36 shows the 4610 TF6 or TF7 printer connectors.
A
Power supply port (RS-232 only)
D
Cash drawer connector
B
RS-232 port or Powered USB port
E
RS-232 mode switch
C
(Not used on the SurePOS 500 Series)
To install the 4610 TF6 or TF7 printer, perform the following steps:
1. Switch OFF the power at the system unit.
2. Remove the SurePOS 500 Model 514 rear cover (see “Rear cover – removing
and replacing” on page 61).
3. Remove the SurePOS 500 Model 514 power supply (see “Power supply –
removing and replacing” on page 68) to get access to the SurePOS 500 Model
514 rear connector panel. See “Rear view and connectors” on page 5 for rear
connector port assignment.
4. Check the printer RS-232 mode-switch setting for the printer. It is near the rear
cable connections. See
E
in Figure 36 for switch location. For switch settings,
see the IBM 4610 SureMark Point-of-Sale Printers User’s Guide .
5. Connect and route the RS-232 communication cable or Powered USB cable
A
and the power supply cable
B
as shown in Figure 37 on page 46.
A
B
C
E
D
Figure 36. 4610 TF6 or TF7 printer connector locations
Installing additional peripheral devices
Updated October, 2008
Chapter 3. Mounting the SurePOS 500 Model 514
45