IBM 4764, Руководство по установке

Страница: 20 / 34

v
Limit your movements; this helps prevent static electricity building up around you.
v Prevent others from touching the card or other components.
v
Before removing the card from the anti-static bag, touch the bag to an unpainted metal surface on
your computer and hold it there for at least two seconds.
v
Handle the card by its edges only. Do not touch exposed circuitry and components.
7. Remove the PCI-X cryptographic coprocessor from its static-protective bag.
8. Verify that the jumpers on the card are positioned correctly; see Table 2 on page 5.
R
S
2
3
2
Eth
net
BT2
BT1
Secure Crypto Module
Front Side
J7
J9
J8
J10
Figure 1. Jumpers on the PCI-X cryptographic coprocessor (front side)
4
4764 PCI-X Cryptographic Coprocessor Installation Manual