IBM 4694-207, Руководство по настройке

Страница: 22 / 42

VendorName "Intel"
Option "NoAccel" "yes"
[...]
EndSection
2) Uninstall all Compiz packages (refer to the SLED 11 documentation).
b. To use the FBdev video driver:
1) Open the /etc/X11/xorg.conf file in a text editor and modify the
Driver
line in the
"Device"
section as follows:
Driver "fbdev"
2) Perform the procedures in “FBdev driver configuration” on page 6.
4.
(4800-721 only) Uninstall all Compiz packages (refer to the SLED 11 documentation).
5. Perform the procedures in “Serial touch screen calibration” on page 3.
IBM SurePOS 700 4800-7x2
To fully configure SLED 11 to run on an IBM SurePOS 700 4800-7x2:
1. Install SLED 11 according to the documentation at http://www.novell.com/documentation/sled11/
index.html.
2. (4800-722 only) Configure the display:
a. Launch the terminal application from Init 3 text console mode.
b. To use the Intel video driver:
1)
Open the /etc/X11/xorg.conf file in a text editor and modify the
"Device"
section to add (or
change) the following lines:
Section "Device"
Driver "intel"
Identifier "Device[0]"
Screen 0
VendorName "Intel"
Option "NoAccel" "yes"
[...]
EndSection
2) Uninstall all Compiz packages (refer to the SLED 11 documentation).
c. To use the FBdev video driver:
1) Open the /etc/X11/xorg.conf file in a text editor and modify the Driver line in the "Device"
section as follows:
Driver "fbdev"
2) Perform the procedures in “FBdev driver configuration” on page 6.
3.
Perform the procedures in “Serial touch screen calibration” on page 3.
IBM SurePOS 700 4800-7x3
To fully configure SLED 11 to run on an IBM SurePOS 700 4800-7x3:
1. Install SLED 11 according to the documentation at http://www.novell.com/documentation/sled11/
index.html.
2. Perform the procedures in “VIA display driver installation and configuration” on page 6.
3. Perform the procedures in “Serial touch screen calibration” on page 3.
14
Linux OS Configuration