IBM 40/80 GB HH DLTVS, Руководство пользователя

Страница: 15 / 50

v
Ensure that nothing blocks the ventilation slots on the bottom and rear of
the tape drive.
Attention: Use only the screws that come with the tape drive. Other
screws might be too long and might damage the drive.
4. Insert a screw through each of the drive-bay holes into the threaded holes
in the drive and tighten the screws with a screwdriver.
Step 5. Attaching cables
To attach the SCSI and power cables to the tape drive:
1.
Locate the SCSI cable on your computer (a 68-pin ribbon cable with one
end connected to the SCSI adapter) and find the next available connector
that is farthest from the adapter. Use all empty bus connectors beginning
with the one farthest from the adapter to ensure better signal quality.
1
SCSI cable (shown with terminator
installed)
2
Power cable
Note:
The SCSI adapter might be part of the computer system board or might be
an adapter installed in an expansion slot.
Installation and user’s guide
1-7