IBM 3745 21A, Руководство по установке

Страница: 6 / 22

IBML
Installation Instructions
Installation (steps 9-11)
9.0 Safety
• Review the Safety Notices and the Service
Inspection Procedures located at the begin-
ning of the
3745 Maintenance Information
Procedure (MIP) manual, SY33-2054.
* Steps 10.0 to 10.1.4.
10.0 Details of Installation
Before the installation of this MES ask the cus-
tomer:
• To set all lines and channel addresses
offline for this controller and associated
machines.
•
To provide the maintenance password.
•
To logoff the Service Processor if not already
done.
10.1 Checking, Diagnostics
10.1.1 MOSS IML
From the control panel:
1. Check that the Power Control indicator
displays 3. If it does not, record the
value __. Then, set the Power Control
indicator to 3.
Press the Validate key.
2. Set the Function indicator to 1.
Press the Validate key.
3. Set the Service Mode indicator to 2.
Press the Validate key.
The MOSS IML is completed when F0E is dis-
played on the control panel.
10.1.2 Logon
From the Service Processor:
1. In MOSS-E View window, click on
Program.
2. Click on LOG ON MOSS-E.
3. Enter the maintenance password, press
Enter.
Administrator Maintenance Mode is displayed on
the lower line of the window.
10.1.3 Open MOSS/MOSS-E Session
1. On the MOSS-E View window, double
click on the ICON of the identified 3745.
2. On the 3745 Menu window, double click
on MOSS Console.
Wait for Function Selection Rules screen.
10.1.4 Disable Channels Adapters
1. Enter CID, press Enter.
2. On the CA Interface Display screen,
record the Enable Channel Adapters, then
Disable all the Channel Adapters.
Note: If 3746 A11 is installed, press F8 to
display channels 8 through 16.
3. Wait for Interface Status Disabled for all
channels.
4. Press F1.
5. If CCU running, enter RST to reset the
CCU.
MOSS goes in MOSS ALONE state.
10.1.5 Verify the CDF
1. Enter CDF, press Enter.
2. Enter 4 (VERIFY), press Enter.
The value from the CDF DATA and
MACHINE DATA should be identical.
If there is a discrepancy, verify the fea-
tures. If correct, update the CDF with the
machine values, enter 2, press Enter.
3745 PN 17G5534 EC C38405 EC C38405A EC D55799 EC D55883 EC E27926
FFBM 6 of 22 06APR93 17JUN93 16SEP94 11MAY95 14MAR97
6