IBM 365xX, Руководство по техническому обслуживанию аппаратной части

Страница: 39 / 222

How to Disable the Power-On Password:
1. Power off the computer.
2. Open the keyboard and lift the right-most section of
the insulator sheet.
3. Push out the small door on the right side of the base
cover. See page 100 for location.
4. Apply a short across the Power-On Password Jumper
Pads.
Warning: When using a metal tool to short the two
jumper pads, make sure the metal tool does not touch
any metal parts other than the two jumper pads.
5. With the jumper tool in place, power on the computer
to clear the password.
6. Remove the jumper and power off the computer.
7. Power on the computer and verify that the password
has been cleared.
To reactivate the password, set the password again.
Supervisor and Hard Disk Passwords:
The
Supervisor Password and the Hard Disk Password (HDP)
are security features that are used to protect the system
and the hard disk data from unauthorized access. No
overriding capability is provided. If only a hard disk
password is set, obtaining permission from the password
owner to unlock the password is a prerequisite for running
diagnostic tests and performing service. If both supervisor
password and hard disk password are set, you can enter
Easy-Setup by pressing the Enter key or power-on
password at the supervisor password prompt. In this case,
the Password, Start up, and Initialize icons cannot be
selected.
See “Password Combinations (POP, HDP, PAP)” on
page 58 for more information about passwords.
If the following symptoms are present, they may
indicate damage caused by non-warranted
activity:
Missing parts may be a symptom of unauthorized
service or modification.
HDD spindles can become noisy if subjected to
excessive force or if the HDD is dropped.
I9990303 errors can be caused by exposure to
strong magnetic fields.
ThinkPad 365X, 365XD (2625)
29