![IBM 3130 Скачать руководство пользователя страница 44](http://html1.mh-extra.com/html/ibm/3130/3130_planning-manual_3271051044.webp)
Table 11 (Page 2 of 2). Paper Recommendations
Parameter
Recommendation
Stiffness (Tabor Method)
Machine direction:
1.7 minimum
Cross direction:
0.8 minimum
Moisture Content
3.4 to 5.5 percent
Surface Resistivity
5x10
9
to 2x10
12
ohms
Label Parameters
The 3130 can also print on paper face self-sticking adhesive-backed labels in
simplex mode. Because the use of labels may cause more problems than printing
on plain xerographic paper, IBM recommends that you and your label supplier
consider the following parameters when purchasing labels:
For more detailed information about paper, cardstock, labels, and other forms, refer
to the
Advanced Function Printer Cut-Sheet Paper Reference.
Attention: When printing labels, observe the following:
Use only the base stacker or upper stacker. Using the side stacker for labels
may damage the printer.
Load labels face down in the upper sub tray, lower sub tray, or main tray.
Run labels only in simplex mode.
Before ordering large quantities of your labels, run several small jobs to be sure
they work properly.
Refer to
IBM 3130 Advanced Function Printer User's Guide for more details
about running labels.
Table 12. Label Recommendations
Parameter
Recommendation
Total Basis Weight
64-160 g/m
2
Caliper
175 microns (6.8 mils) maximum
Face Stock Smoothness
70 to 200 Sheffield units
Prepunched Paper
Prepunched paper should be flat and without deformation. Discard paper with
ragged or damaged hole edges. Do not allow chad (the little paper bits that result
from punching) or paper dust to adhere to the paper.
Supplies with prepunched holes must conform to the following specifications:
Maximum of four holes
Maximum hole diameter of 10 mm (0.39 in.)
Holes may not be located in, or protrude into the area marked by the diagonal
lines in the following figures; otherwise, the paper sensor detects the holes and
may give false paper jam errors.
32
3130 Advanced Function Printer:
Introduction and Planning Guide
Содержание 3130
