IBM 2621483 - ThinkPad i Series 1400 2621, Руководство пользователя

Страница: 96 / 168

Using Passwords
Once you set a hard disk password, the hard disk password
prompt ( ) appears at the top left corner of the screen each
time you turn on your computer or when your computer returns
from hibernation mode to normal operation.
Notes:
1. When both power-on and hard disk passwords are set, the
computer asks for the power-on password at boot-up and
resume from hibernation mode.
2. When the hard disk password is set, and you want to enter
the BIOS Utility, you need to press F1 immediately after cor-
rectly entering the hard disk password.
To enter a password, do the following:
1. Type your password.
Don't hold down a key too long, because the same character will
be entered continuously.
2. Press the Enter key.
An X appears if you enter the wrong password. If you fail to
enter the correct password in three tries, you must press and
hold the power switch for 5 seconds to turn off the computer,
wait 5 seconds, and then turn it on again and retry.
Removing and Changing a Password
To change or remove a password, do the following:
1. Restart the computer.
2. While the ThinkPad logo is being displayed, wait for the the
BIOS Utility prompt to appear.
Ÿ
If the power-on password or hard disk password is set, the
corresponding password prompt appears. Enter the pass-
word correctly and press Enter. Then immediately press F1
to enter the BIOS Utility.
Ÿ
If the setup password is set, the setup password prompt
appears. Enter the setup password correctly and press
Enter.
80
ThinkPad i Series 1400/1500 User's Reference