IBM 220, Руководство по обслуживанию

Страница: 23 / 68

System Requirement
The 7206 Tape Drive attaches to selected RS/6000 systems that uses a Wide Fast-20
LVD SCSI or single-ended FW SCSI adapter interface which meets the Small
Computer System Interface-2 (SCSI-2) standard X3.131-1994 Rev 10L of the
American National Standards Institute (ANSI).
The 7206 Tape Drive must be attached to a supported RS/6000 processor and
adapter with an AIX operating system at level:
v
4.1.5 (when installed with authorized program analysis report (APAR) #IX69941)
v
4.2 (when installed with APAR #IX69950) or higher
v
4.3 or higher
Specifications
Table 2. Specifications for the 7206 Model 220 4mm Tape Drive
Physical Specifications
Width 250 mm (9.8 in.)
Depth 275 mm (10.8 in.)
Height 55 mm (2.2 in.)
Weight 3.7 kg (8 lb)
Power Specifications
kVA (typical) .03 @120 V ac
V ac Input 100 to 125
200 to 240
V dc Output +5 and +12
Frequency 50 to 60 Hz
Heat Output 77 Btu/hr (23 watts) @ 240 V ac
Power Factor .4 to .6
Other Specifications
Altitude 2135 m (7000 ft)
Recommended Environment
Environmental Factor Operating Non-operating
Temperature
16 to 32°C
(60 to 90°F)
10 to 43°C
(50 to 110°F)
Relative Humidity
(noncondensing)
20 to 80% 20 to 90%
Maximum Wet Bulb
23°C
(73°F)
27°C
(80°F)
Chapter 1. Reference Information
9
|
|
|
|
|
|
|
|
|
|