IBM 2145-4F2, Руководство по установке

Страница: 112 / 143

Error codes
Error codes are displayed on the front panel display.
For descriptions of the error codes that are displayed on the front panel display,
see the various error code topics for a full description of the failure and the actions
that you must perform to correct the failure.
SAN Volume Controller menu options
Menu options are available on the front panel display on the SAN Volume
Controller.
Menu options enable you to review the operational status of the cluster, node, and
external interfaces. They also provide access to the tools that you need to install
and service the node.
Figure 61 shows the sequence of the menu options. Only one option at a time is
displayed on the front panel display. For some options, additional data is
displayed on line 2. The first option displayed is the cluster option.
Use the Left and Right buttons to navigate through the secondary fields that are
associated with some of the main fields.
Note: Messages might not display fully on the screen. You might see a right angle
bracket (>) on the right-hand side of the display screen. If you see a right
angle bracket, press the Right arrow button to scroll through the display.
This action displays the rest of the text. Press the Left arrow button to scroll
back. When there is no more text to display, you can move to the next item
in the menu by pressing the Right arrow button.
S h u t t i n g D o w n
Figure 60. Shutting down display
Cluster Status IP address Subnet mask
Gateway
Recover cluster?
Node Status Create cluster?
Ethernet
FC Port-1 FC Port-2 FC Port-3 FC Port-4
Select Language?
Main Options Secondary Options
MAC
1nflt9
Figure 61. Menu options sequence
82
IBM System Storage SAN Volume Controller: Installation Guide