5
ENGLISH
FRANÇAIS
ESPAÑOL
POR
TUGUESE
APPENDIX
Fitting the Aptiva L Series Tilt/Swivel Stand
1 Align the stand interface with the monitor as shown in the diagram so
that the horseshoe connector fits into the matching slot in the bowl.
2 Push the stand back until you hear a loud click which shows it is
locked in place.
3 Turn the stand 90° counter clockwise until the notch points to the
front of the monitor.
For Aptiva L series computers.
The stand interface is not required for
Aptiva L series computers.
USMM75Bk.book : Emm75bod.fm Page 5 Friday, September 12, 1997 7:30 PM