IBM 2109 Model M12, Руководство пользователя

Страница: 38 / 97

Table 7. Component weights (continued)
Component Weight
Door 3.4 kg (7.6 lbs)
Blower assembly 4 kg (8.8 lbs)
Power supply 3.2 kg (7.0 lbs)
WWN bezel 0.27 kg (0.6 lbs)
CP card 2.5 kg (5.6 lbs)
16-port card 3.9 kg (8.6 lbs)
Card filler panel 1.6 kg (3.2 lbs)
Cable management tray 0.27 kg (0.6 lbs)
2109 Model C36 with Model M12 specifications
The specifications for the 2109 Model C36 with Model M12 are listed in Table 8.
Table 8. 2109 Model C36 with Model M12 specifications
Dimension Value
Height 1785 mm (70.3 in.)
Depth
v
With rear door installed: 1042 mm (41 in.)
v
With rear and front door installed: 1098 mm (43.3 in.)
Width
v
With side panels installed: 650 mm (25.6 in.)
v
Without side panel installed: 623 mm (24.5 in.)
EIA units 36 EIA units
Weight Cabinet with two 2109 Model M12 switches: 816 kg (1795 lbs)
16-port card specifications
The ports in the 2109 Model C36 with Model M12 support full-duplex link-speeds at
2.125 Gbps or 1.0625 Gbps, inbound and outbound, automatically negotiating to the
highest common speed of all the devices that are connected to the port. Each port
has a SERDES that accepts 10-bit wide parallel data and serializes it into a
high-speed serial stream. The parallel data is expected to be 8B/10B encoded data
or equivalent.
The ports are compatible with optical SWL (780 - 850 nm), and optical LWL (1270 -
1350 nm), SFPs, and SFP-compatible cables. The strength of the signal is
determined by the type of SFP being used.
The ports are universal and self-configuring, and are capable of becoming F_ports,
FL_ports, or E_ports.
The ports meet all required safety standards. For more information about these
standards, see Table 16 on page 23.
CP card specifications
This section describes the specifications for the CP card.
18
IBM TotalStorage SAN Switch: 2109 Model M12 User’s Guide