IBM 2 Gigabit Fibre Channel PCI-X Adapter 5704, Инструкция по установке и использованию

Страница: 22 / 46

3. Transfer the files to the control workstation’s LPP source, as follows:
a. Type the following:
smitty bffcreate
Press Enter.
b. Select INPUT device/directory for software . In the entry field, type the following:
/spdata/sys1/install/[lppsource]
substituting the directory name which was recorded in step 4b on page 11 for [lppsource] . Press
Enter.
c. Move the cursor to the SOFTWARE package to copy option and press F4 to select the software
to be installed. Use the F7 key to select the required device drivers.
v For adapter Type 4-S, select devices.pci.df1000f7
v
For adapter Type 4-W, select
devices.pci.df1000f9
v For adapter Type 5704, select devices.pci.df1080f9
d. Use the F7 key to select the following device driver:
devices.pci.common.IBM.fc
e. Repeat Step 3d for any other device drivers that you may need. These may include:
v devices.fcp.disk
v
devices.fcp.disk.array
v devices.fcp.tape
Press Enter.
f. Move the cursor down to DIRECTORY for storing the software package and enter the
appropriate LPP source destination directory:
/spdata/sys1/install/[lppsource]
substituting the directory name that was recorded in step 4b on page 11 for
[lppsource]
. Press
Enter to begin copying the files.
Note: This step may take several minutes while the directory table of contents is updated.
Continue to the next section, “Finalizing Preparations for Device Driver Installation.”
Finalizing Preparations for Device Driver Installation
Do the following to finalize preparations for device driver installation:
1. Update the SPOT (Shared Product Object Tree).
a. Type the following:
smitty nim_res_op
The Resource Name panel displays with
boot resources boot
highlighted.
b. Move the cursor down until the SPOT resource is highlighted. The SPOT resource should look
similar to:
spot_AIX433 resources spot_[lppsource]
where
[lppsource]
is the directory name recorded in step 4b on page 11.
12
Gigabit Fibre Channel PCI Adapter Installation and Using Guide