IBM 2 Gigabit Fibre Channel PCI-X Adapter 5704, Инструкция по установке и использованию

Страница: 13 / 46

2 Gigabit Fibre Channel PCI-X Adapter (Type 5704)
v 2125Mb/s Fibre Channel Interface
v
PCI Bus Compatible (32-bit slot)
v
Supports Short Wave Optics (non-OFC)
v
Upgradable microcode (See your system user’s guide or contact your service representative)
2
3
1
1
J 1 X JX2
1 3 3
1. Jumper JX1, Pins 1 to 2 only and Jumper JX2, Pins 2 to 3 only
2. Data Link Status LEDs
3. Multimode Fiber SC Connector
Software Requirements
v
The Gigabit Fibre Channel PCI Adapter (Type 4-S) is supported on AIX version 4.3.2 and later.
v
The 2 Gigabit Fibre Channel Adapter for 64-bit PCI Bus (Type 4-W) is supported on AIX Version 4.3 and
later.
v The 2 Gigabit Fibre Channel PCI-X Adapter (Type 5704) is supported on AIX 5L for POWER with the
5100-04 Recommended Maintenance package (APAR IY39794) and AIX 5L Version 5.2 with the
5200-01 Recommended Maintenance package and later.
Environmental Requirements
v
Operating temperature: 5 degrees C to 40 degrees C
v
Operating humidity: 0 to 90% (non-condensing)
v
Barometric operating pressure: 86 to 106 kPascals
v
Maximum tolerance in power supply variation: +5% to -5%
Chapter 1. Overview
3